5 PC Vent Kit for the XP
08-UP Rev XP Platform. This simple but functional 5 pc kit out performs all other kits on the market. The key to this design is the fact that the small triangle on the front of the panel sicks out at just the right angle to catch more than enough air to cool your belt and pipe/can. in order to due so we have to give the air somewhere to go, the knee vents do just that. The fith pc. is a shocktower vent for the clutch side just for a little added air. You do not need a large side panel vent to do the job. (the rev platform did not have the air catching ablity that the xp panel has, so a lg vent was needed to catch enough air and give it somewhere to go. If you feel you must have a lg vent we do offer them but do not think you need it. We also have a small vent for above the clutch if you tend to do a lot of stop and go (tree type) riding. Made from extremely duriable, flexable abs frame, cnc beveled cut, with super strong pvc coated mesh, solvent welded to the frame. Clutch side has a second prefilter layer to keep even the finest powder off your clutches. Includes black rivets and backers for installation. (NOTE THE PLASTIC SHROUD ATTACHED TO THE BELT GUARD SHOULD BE REMOVED, BUT YOU MUST KEEP THE BELT GUARD IN PLACE.)
