Axys Chassis Hood Finally after a long wait a AXYS Chassis hood. We tipped the gauge mount forward so it can easily be seen when standing. The stock vents just infront of the headlight have been removed, for those running twin pipes this adds almost 2 inches in clearance... MSRP: Was: Now: $310.00 Choose Options
Polaris Matryx Lightweight Hood Hood for the Matryx chassis. Hood without storage bags weighs just 3.5 pounds Hood with upper bag installed is just under 4pounds. Hood can be purchased with no gauge mount, no bags, (drag sled, water cross). Hood only with gauge mount... MSRP: Was: Now: $310.00 Choose Options
Ascender Chassis Polycarbonate Hood Lightweight polycarbonate hood for the 2018 up ascender chassis sleds. Hood is designed to be used with the factory front hood "wings" retaining your factory hood color or wrap. Hood by its self weighs in at just under 3 pounds, stock hood... MSRP: Was: Now: $310.00 Choose Options
Skidoo Gen 4 Lightweight Hood Kit Lightweight hood kit for your gen4 chassis. This is not a complete one piece hood, instead this is a new center section that is used along with your outer hood panels from your stock hood. Kit includes a black thermalformed polycarbonate... MSRP: Was: Now: $270.00 Choose Options
Proclimb Stock Component Lightweight Hood / Intake Complete kit to convert your stock hood into a lightweight nose intake hood. Kit includes molded ABS headlight delete, Machined marine grade HDPE block off plate, 6 intake vents, one large under gauge vent for removing traped engine heat, a full set of... MSRP: Was: Now: $250.00 Choose Options
Pro Ride Hood Polycarbonate Pro Ride Hood. This polycarbonate hood weighs 3 pounds 13 oz. The stock hood fully loaded is 12pound 9 oz. Stock hood with our vented headlight delete weighs 5 pounds 10 oz. In development is a lightweight air shelf that will... MSRP: Was: Now: $310.00 Choose Options
RX - 1 RX - 1 lightweight hoodRX-1 lightweight hood with the headlight and gauge pod from a apex molded in for a updated look. Hood weigh in at 5 3/4 pounds. MSRP: Was: Now: $310.00 Choose Options
Nytro Hood Lightweight nytro hoodHood and gauge pod all one piece , with headlight molded over. fits all nytro's helps hide that ill fitting nytro turbo gas tank (you know the one). MSRP: Was: Now: $310.00 Choose Options
IQ RACE RMK IQR-IQRMKA iq racer style hood for your 05-09 iq rmk, raw chassis and dragons included. Fits on your stock chassis and uses your stock hinge. Air box shelf is avaiable for using stock air intake. - MSRP: Was: Now: $310.00 Choose Options
ZRT-1 T-CAT & ZRT95-98 T-CAT, ZRT power specials. Extra height for pipe clearance, headlight molded in. Hood weighs 5.75 pounds. MSRP: Was: Now: $310.00 Choose Options
ZRT-2 THUNDERCAT ZRT-80099-01 ZRT 800 and t-cat also 01 mountaincat 1000. headlight molded in. For a limited time we have brought back the ZRT-2, allow 2-3 weeks for production before this hood ships. you must pick a "shipping package" this is the cost of... MSRP: Was: Now: $310.00 Choose Options
ZR-2 powder special98-2000 powder special (twins),zl models and 98-99 zr& snopro. headlight is molded into hood. installs to stock hinge. hood weighs 5.75 pounds MSRP: Was: Now: $310.00 Choose Options
KING-----M KING CAT TO M99-up zr-3 chassis including the king cat.This hood looks like the newer m series hood but is made to fit your zr-3 or king cat chassis. hood weighs 5.25 pounds. We now have a hinge kit that allows you to hinge this hood off the stock hinge... MSRP: Was: Now: $310.00 Choose Options
APEX APEXApex hood with gauge pod and headlights molded in. Made of polycarbonate much more flexible than fiberglass hoods, we fold this hood in half to ship it. weighs in a just under 4 lbs. MSRP: Was: Now: $310.00 Choose Options
IQ RACER HOOD IQ RACER05-10 iq 440 racer. headlight and vents moled in, stock air box shelf can be used. Will accept the stock hinge. MSRP: Was: Now: $270.00 Choose Options
CK-3 CK-398-2000 mach and machz . headlight and gauge pod molded in, will accept windsheild, extra height for lg pipes. MSRP: Was: Now: $310.00 Choose Options
S Body SUMMIT / MXZ96-99 mxz forumal and summits 96-98 mach, mach z. Headlight is molded in. hood weight 6.25 pounds. MSRP: Was: Now: $310.00 Choose Options
KING CAT -ZR-3 KING / MOUNTAINZR-3 chassis for your 2000-up mountain cat / kingcats and zr chassis (2001 mountain cat see zrt-2). Headlight is molded in, easily mounted to stock hinge, hood weighs 5.5 lbs. --------------- SHIPPING IS NOT INCLUDED IN THE PRICE. YOU MUST... MSRP: Was: Now: $310.00 Choose Options
EDGE RMK EDGE RMK01-05 polaris edge chassis sleds. Healight is molded in, air box shelf avaiable for stock air intake. weighs 6 pounds. MSRP: Was: Now: $310.00 Choose Options
IQ RMK IQ RMK & DRAGON05-up IQ rmk including all dragons. Headlight has been molded out, works with stock hinge. Air box shelf available for stock intake. MSRP: Was: Now: $310.00 Choose Options
INDY WEDGE INDY WEDGE80-98 indy chassis sleds, 80-86 musrt use 87-up nose cone, will accept stock headlight and windsheild. This hood/mold has seen better days, hood will have some inperfections, very usable but not as clean/straight as it once was. MSRP: Was: Now: $310.00 Choose Options
GEN 2 For a very limited time we are again offering the gen 2 hood. we have retired this mold but due to demand we are doing a production run. Two gen2 hoods can be shipped together for almost no additional cost. you must pick a "shipping... MSRP: Was: Now: $310.00 Choose Options
F-Series Hoods 03-UP FIRECATLight weight polycarbonate hoods for all f series,and sabercat sleds. Mod Style hood has center air intake molded in, Stock style intake no longer available. In order to save on shipping cost we ship this hood in a very small box, by... MSRP: Was: Now: $310.00 Choose Options
Skidoo XM Chassis Hood Lightweight polycarbonate XM chassis hood. Hood without intake weighs only 3pounds 6oz. Hood complete with stock gauge and lightweight intake system weighs only 6lbs 10oz. Complete stock hood as removed from sled weighs 18pounds 9oz. ... MSRP: Was: Now: $310.00 Choose Options
